Are you looking to buy 3DXTech TPU + GF30 FIBERX 60D 1.75mm in Australia?
FibreX™ TPU+GF30 elastomer is an engineering-grade material that we chose based on its balance of printability, flexibility, chemical resistance, and toughness. 3DXFLEX™ TPU+GF30 has a hardness of 60D, allowing you to make very tough, impact resistant, flexible prints. We recommend direct-drive extruders, but experienced users can be successful with Bowden-type drives as well.
Benefits of FibreX™ TPU+GF30 (60D) Include:
- Shore 60D semi-flex hardness
- Ease of printing compared to similar flexible materials
- Excellent layer bonding
- Outstanding fatigue resistance
- Very low odor emitted while printing
- Low moisture absorption
- Retains flexibility even at low temperature
- Styrene and BPA free
1.75mm and 2.85mm +/- 0.05mm in diameter
Recommended Print Settings:
- Extruder: 230-255°C
- Bed Temp: 23-40°C
- Heated Chamber: Not required
- Drying Instructions: 65°C for 4 hours
Browse more
- Browse all 3DXTech
- Browse all Speciality Filament