FYSETC Spider V2.2 32Bit 3D Printer Motherboard

Are you looking to buy a Fysetc Spider V2.2 32Bit 3D Printer Motherboard in Australia?

The Spider V2.2 board is a full-featured and excellent controller board, with space for EIGHT TMC stepper drivers, the ability to connect a Raspberry Pi directly to the board either through USB or through UART. Recommended for Voron 3D Printers and others. 

Please see note at end of description for important information about this board!

Features
- Compact size: 155.3mm x 76.5mm
- Based on STM32F446 180Mhz，all IOs can withstand 5V voltage
- 8 TMC stepper drivers support, with Uart&SPI support
- Improved TMC jumper settings again，simpler and easier
- 28V input max，12V@5A DC-DC，5V@8A DC-DC (Especially for Raspberry Pi)，3.3V@0.8A LDO
- Two car fuses for hot bed input and main power input
- Limit switch socket 24V/5V/3.3V optional, ready for more other equipment, such as -inductive sensor, BL-Touch
- XH2.54 connectors
- 10x PWM capable power mosfet outputs (1 for HotBed, 3 for Heat-End, 3 for fans, 3 for RGB LED strip)
- 3pin temperature header, you can use thermistor or thermocouple (requires AD597 module)
- Up to 8 ways PWM fans (only use 1 extrueder and no 12V/24V RGB used )，2 ways RGB led(12V & 24V optional) ，1 way 5V-RGB led (NEO-PIXEL/WS2812)
- RepRapDiscount SmartController compatible pin header on board
- UART1-Raspberry Pi pin header (including 5V@8A power supply)
- 2X4 PinHeader Out for SD Card moudle
- Onboard micro-SD card
- Type-C and Type-B USB connector optional
- EXP1 & EXP2 have more multiplexing functions, such as USART, I2C, CAN
- SD card & USB upload support