Are you looking to buy an Alpha A65 Tiny Whoop in Australia?
Let's welcome the iFlight Alpha series, a new way to fly FPV!
The iFlight Alpha A65 V2 is an even smaller size 65mm lightweight 24.5g whoop. This version features an updated canopy, frame, motors, AIO Board, and camera. Stuffed with our newest electronic components and technology, this thing will guarantee hours of practice or racing across even the smallest spaces. The Alpha A65 is your answer to the problem of flight time efficiency while maintaining sufficient power.
Features
- Butter smooth XING 0803 (more torque and efficiency with longer flight times)
- Ducts to protect the sensitive environment or yourself
- Pre-tuned with smooth cinematic settings
- 1200TVL 2.1mm 160° Camera
- 24.5 grams (without battery)
V2 UPGRADES
- April 20, 2022: Before SucceX F4 1S 5A AIO Whoop Board w/VTX changed to BLITZ F411 1S 5A Whoop AIO Board
- January 2022: Before XING 0802 22000KV changed to XING 0803 17000KV
- Upgraded Canopy and Boby Frame
- Upgraded Camera
Specifications
- Motors: XING 0803 17000KV FPV Micro Motor
- AIO: BLITZ F411 1S 5A AIO Whoop Board
- Flight time: 3-4 min cruising (1S 300mAh)
- Camera: 1200TVL 2.1mm 160° Camera
- Weight: 24.5g (without battery)
- Propellers: HQProp 31mm
- FC Pattern: 25.5x25.5mm
- Propeller Size: 31mm
- Body size: 46x46mm
- Wheelbase: 65mm
- Antenna: Whip
BLITZ F411 1S 5A WHOOP AIO BOARD
- Weight: 4.8g (with power cable, VTX, and VTX antenna)
- Mounting pattern: 25.5*25.5mm/φ3mm （half-hole)
- Supported Protocols: CC2500, SPI, D8, S-FHSS
- FC Firmware: IFLIGHT_BLITZ_F411RX
- BEC output: 5V 500mA
- Connector: Micro-USB
- MCU: STM32F411
- INA pad: n uart2
- Barometer: NO
- Size: 29*29mm
- Gyro: BMI270
- Blackbox: NO
- Signal Support: Dshot, Oneshot, Multishot
- Current: 5A continuous and peak 6A
- ESC Firmware: O-H-30 BLS 16.8
- Current sensor: yes
- ESC Telemetry: NO
- Current scale: 400
- BLHeli: BLHeli-S
- Input: 1S
VTX
- Connector: UFL/IPEX
- Protocol: Smart audio
- Power: PIT/25/50mW
- Input voltage: 5V
- Channels: 48CH
FACTORY SETUP and WIRING DIAGRAM
This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some Betaflight tweaks to enhance the flight experience.
Reflashed your drone but didn't backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK
TIPS
- VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.
- If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
- Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter.
Includes
- 1x iFlight Alpha A65 Tiny Whoop Drone - Analog - V2 (Prebuilt and Tested)
- 2x HQ 31mmx3 1mm (Set of 4) - Color May Vary
- 1x MicroUSB Cable
Browse more
- Browse all BNF
- Browse all Analog BNF
- Browse all iFlight
