Are you looking to buy a E3D Revo for the Prusa Mini in Australia?
Revo™ Prusa Mini Edition is a drop-in replacement for your Prusa Mini & Mini+, giving you all the benefits of E3D’s RapidChange Revo ecosystem in an easy-to-upgrade package. The Revo™ Prusa Mini Edition includes a Prusa-specific thermistor extension cable, heater extension cable, a 3D printed bracket and everything else you need for a true drop-in replacement experience.
Key features
- Max temp: 300C
- Weight: 30g
- Nozzle type: RapidChange Revo
- Maximum temp: 300°C
- M12 x 1.5 thread mounting
No machine redesign. Revo™ Prusa Mini is a top choice if you want to update your old Prusa Mini or Mini+ setup to the latest generation of E3D™ HotEnd technology. It has the same nozzle position, and filament diameter. All you need to do is undo the two screws that hold the existing HotEnd and reattach the new bracket. Easy-to-follow upgrade instructions can be found here. What’s more, your pre-existing Prusa print profiles remain compatible with no changes necessary.
Ready for Revo™. Revo™ Prusa Mini is designed to work with Revo™ Nozzles, meaning you can perform nozzle swaps with your fingers at room temperature without complex tools or hot tightening. Each Revo™ Nozzle is factory sealed, making it much simpler and more reliable than most HotEnd technology available today.
Enhanced performance. Revo™ Prusa Mini uses a Revo HeaterCore, our latest HotEnd heating and sensing architecture. It reaches temperature much faster than a traditional aluminium heater block, and it’s much safer: a positive temperature coefficient (PTC) means the HeaterCore can’t melt at extreme temperatures, reducing hazards in the event of a thermal runaway.
No firmware or PID changes. Revo™ Prusa Mini was designed to be fully compatible with the stock Prusa Mini firmware – this means there’s no need to modify any firmware. Even more impressive is that it’s fully compatible with the Prusa Mini temperature monitoring model, meaning you don’t need to PID tune after the upgrade!
Please note
- You may need to adjust your Z offset when changing nozzles.
- This kit does not include a fan. The stock Prusa fan should be reused.
- This kit does not include any PTFE tube. If you require additional PTFE it can be purchased here
Upgrade Guide: https://e3d-online.zendesk.com/hc/en-us/articles/4565871722397-Revo-Micro-Prusa-Mini-upgrade-guide-Edition-2-
Datasheet: https://e3d-online.zendesk.com/hc/en-us/articles/5895215280413-Revo-Micro-Datasheet
Conformity: https://e3d-online.zendesk.com/hc/en-us/articles/4405841037981-Revo-Micro-Compliance-Documentation-
Upgrade Video: E3D Revo™ PRUSA Mini+ Upgrade Guide
What are the differences between Revo Prusa Mini and Revo Micro?
We’ve added:
- The official E3D mounting bracket, printed in Prusament Jet Black PETG (not included, download it here)
- Some cable ties
- 2 x square nuts for secure mounting of the printed bracket
- A reworked thermistor extension cable with a Prusa specific connector
We’ve taken out:
- The Micro fan and its cables (the official Prusa Mini fan is used)
- The M12 nut (the Micro threads directly into the Printed bracket)
- The generic thermistor extension cable
Why are users choosing Revo?
1. To avoid Hot Tightening - Change nozzles in 30 seconds using your fingers.
Rid yourself and your printer of Hot-Tightening. It’s slow and potentially painful, both physically and mentally. ‘But what if I never change nozzles?’ we hear you say. You will now. Revo makes it so easy that you will find yourself switching nozzles all the time.
2. For modularity – Explore new nozzle sizes and types
Test out a 0.15mm nozzle on some exceptionally small 3D prints or take on abrasive materials for the first time with ObXidian.
3. To eliminate the chance of HotEnd leaks
Revo’s integrated heatbreak construction makes HotEnd leaks virtually impossible.
4. To minimise downtime
Got a clogged nozzle? - Just swap in a new one and get straight back to printing. Especially useful for print farms or those on a tight schedule!
5. For colour coded nozzles
Identify nozzles at a glance. Make use of our fancy colour-coded nozzle holders from Printables to add a splash of colour to your Prusa Mini.
Prusa Mini users also get the benefits of...
Reducing the weight of the toolhead
Swapping to Revo makes your Mini’s toolhead around 25 grams lighter. As the Mini has a cantilevered X-axis, every gram counts!
No more PTFE in the HotEnd
Revo’s all-metal construction means you no longer need to worry about maintaining the PTFE tube or dealing with print quality issues caused by it being incorrectly sized.
Kit includes
- 1 x Revo™ Micro heatsink
- 1 x Collet
- 1 x Collet clip
- 1 x Revo™ HeaterCore 24V
- 1 x Revo™ HeaterCore spring
- 1 x Prusa Mini extension cable kit
- 1 x Prusa Mini bracket
- 3 x Cable tie
- 2 x M3 square nut
Single nozzle kit
- 1 x 0.40mm Brass Revo™ Nozzle
Fully loaded nozzle kit
- 1 x 0.25, 0.40, 0.60, and 0.80mm Brass Revo™ Nozzles
Browse more
- Browse all Prusa Mini Spares
- Browse all Printer Spares
- Browse all Prusa
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
Same-Day Ship
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
Transparent Stock
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
Highly Rated
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Somersby NSW Australia.
Tech Precision
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
Fast Support
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
Get Rewarded
Score a FREE gift on first and recurring orders, and discount shipping on orders over $99.
We’re on Social
We have nothing to hide. Follow us on social, tag @PhaserFPV, and become a part of our online community and family in our facebook group.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV & 3D Printing don’t settle for less. Demand the best – insist on Phaser FPV.