BetaFPV F722 2-6S AIO 35A FC + ESC

$112.95 (inc. GST)

In StockIn StockOut of stock

CURRENTLY IN STOCK

Out of stock
Order in Hours, Mins, Seconds (before 1:00pm AEST) for same day despatch.

4 payments of $28.24 AUD More info

Add to Wishlist

Are you looking to buy a BetaFPV F722 2-6S AIO 35A FC + ESC in Australia?

The F722 2-6S AIO 35A FC is a very reliable FC that is made to meet your advanced FPV needs. Comes with F722 chip and BLHELI_32 ESC firmware, this board provides a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight. What's more, F722 AIO 35A FC has specially added a 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, super easy to install. It also can handle up to 6S of input voltage and push your FPV racer to the max. We highly recommend it for 4-5'' Toothpick quad, such as X-Knight 5'' Toothpick Quad.

     

     

     

    Bullet Point

    • Compared with F4 AIO 35A FC, F722 FC's firmware version is upgraded from F411 to F722, providing a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight.
    • F722 AIO 35A FC has specially added 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, perfect for the pilots who enjoy the DJI Digital VTX system.
    • 6 full UARTs are available on this board. With plenty of UARTS, Pilots could have more options for external parts like VTX, GPS, Receiver and other components.
    • Come with a built-in 10V BEC circuit, this board can offer the external components a more stable voltage and current, which brings pilots a better flight experience.
    • It can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.
    • With the 6S battery and this F722 35A AIO toothpick FC, the drone will break through the limit of toothpick power, exploring more possibilities in 4-5'' drones.

    Specification of FC

    • Item: F722 35A AIO FC(BLHeli_32)
    • Weight: 7.89g
    • CPU: STM32F722RET6
    • Six-Axis: MPU6000 (SPI connection)
    • Mounting hole size: 26mm * 26mm
    • Firmware version: betaflight_4.2.x_BETAFPVF722
    • OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
    • Support programmable LED like WS2812 etc
    • Built-in current sensor

    Specification of ESC

    • Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
    • Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)
    • Input voltage: 2S-6S Lipo
    • Continuous current: 35A
    • Peak current: 40A
    • ESC firmware: BLHELI_S 32
    • Indicators: 2 indicators: receiver indicator (green)/Flight control power indicator (red)
    • Capacitance: CS|5*10*13mm|470μF|35V
    • Connecter: 80mm 14AWG silicone cable with XT60
    • Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series

    Diagram for F722 35A AIO FC

      How to Connect the External RX to the FC

      Here is the connection diagram with the Frsky XM+ receiver.

      Here is the connection diagram with the FS-RX2A receiver.

      Here is the connection diagram with the Futabe-X-BOSS AC900 receiver.

      Here is the connection diagram with the TBS Crossfire receiver.

      Here is the connection diagram with DSMX FullSpeed receiver.

      Status LED

      There are 2 LEDs on the bottom of the board to indicate the status, including the Receiver LED ( Green) and FC Power LED ( Red ). 

      LED  Status  Description
      Mode LED (Green)  Solid Horizon Mode/ Angle Mode
      Mode LED (Green)  Extinguished Acro Mode
      Power LED (Red)  Solid  Power on

      Package

      • 1 * Toothpick F722 35A AIO 2-6S brushless flight controller
      • 1 * Cable Pigtail (XT60U)
      • 1 * Capacitance
      • 1 * 6-Pin Connector for DJI Digital VTX
      • 4 * M2x10mm Screws
      • 8 * M2 Nuts

      Browse more

      Browse all Toothpick Flight Controllers
      Browse all FC ESC Combos
      Browse all BetaFPV

      betafpv-micro-drone-logo1

      Why buy from Phaser FPV?

      • DEPENDABLE - Phaser started in 2012 -Long reputable history & 5 star reviews.
      • SPEED - All stock located in our retail store in Gosford NSW Australia. - We ship express today, you receive tomorrow.***
      • TRANSPARENT Stock - If it says in stock on our website, we ship today! If we know the ETA, we also advise of this on each product.
      • EXPERIENCE - Within our 10 Staff Members, you will find at least two who know, are experienced, and regularly use our products. Confused or not sure what to buy? Please call us and get our advice - We will save you money, do not buy twice.
      • FREE gift on first and recurring orders
      • FREE shipping on orders over $120***
      • FREE express shipping over $250***
      • Active on social media - Tag us or DM us!
      • Large Facebook Community for like-minded individuals.
      • Piper - Come in-store and meet our friendly, cute, house dog. Careful, she loves to lick!
      • GST Registered. If you are a business and want to claim GST you may note other niche FPV stores are not registered.
      Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
      January,February,March,April,May,June,July,August,September,October,November,December
      Not enough items available. Only [max] left.
      Shopping cart

      Your cart is empty.

      Return To Shop

      Add Order Note Edit Order Note
      Estimate Shipping
      Add A Coupon

      Estimate Shipping

      Add A Coupon

      Coupon code will work on checkout page

      BetaFPV F722 2-6S AIO 35A FC + ESC

      $112.95