The new layout 12A 2-4S F4 AIO FC(BLHeli_S) is customized for Toothpick Drone. With the real holes, side-mount USB and all solder pads of the edge of FC, greatly reducing installation time and improving ease of self-assembly. The weight saving of the all in one board makes this ideal for tight builds - using the included Anti-vibration rubber dampers for mini stack height.
- New layout with whoop mounting pattern, designed real holes instead of notches, customized for Toothpick Drone
- Adopt USB side-mount, easy to plug in
- All of solder pads are at the edge of FC, which is a convenience to solder
- Double-sided motor solder pad. Pins pad and wires pad are both built-in for motors connection
- Integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD and 2-4S 12A ESC, support 4S battery for fast-flying experience
Recommended Battery and Motor Combo
Comparison of F4 12A AIO FC and Toothpick 12A AIO FC
Double-sided Motor Solder Pad
Support connect with motors via connectors or solder directly
Whoop Mounting Pattern and Real Holes of Mounting Holes
Whoop size with 26.5*26.5mm mounting holes
SPECIFICATIONS OF FC
- CPU: STM32F411CEU6 (100MHZ)
- Six-Axis: MPU6000 (SPI connection)
- Size: 32.5*32.5mm (26.5mm mounting holes)
- Firmware version: Betaflight MATEKF411 (MK41)
- OSD: Build-in BetaFlight OSD (OSD chip: AT7456E)
- Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver.
- Support programmable LED like WS2812 etc
- Built-in current sensor
- Weight: 6.2g(Without Pins), 6.5g(Pins Pre-solder)
SPECIFICATIONS OF ESC
- Support BLheli/BLHELI_S suite Pass-through ready
- Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
- Input voltage: 2S-4S Lipo
- Continue current: 12A
- Peak current: 15A
- Firmware: BLHELI_S
- Processor: SILABS EFM8BB21F16G-C
- Motor Connectors: 1.25mm header pins connector
- Factory firmware: G-H-30-16.7
DIAGRAM FOR Toothpick F4 2-4S AIO FC
- 1 * Toothpick F4 2-4S AIO brushless flight controller
- 1 * Cable Pigtail (XT30)
- 4 * M2x10mm screws
- 4 * M2 nuts
- 4 * Anti-vibration rubber dampers
- 4 * Motor Pluggable Pins (IF NOT Pre-solder)
Why buy from Phaser FPV?
- DEPENDABLE - Phaser started in 2012 -Long reputable history & 5 star reviews.
- SPEED - All stock located in our retail store in Gosford NSW Australia. - We ship express today, you receive tomorrow.***
- TRANSPARENT Stock - If it says in stock on our website, we ship today! If we know the ETA, we also advise of this on each product.
- EXPERIENCE - Within our 10 Staff Members, you will find at least two who know, are experienced, and regularly use our products. Confused or not sure what to buy? Please call us and get our advice - We will save you money, do not buy twice.
- FREE gift on first and recurring orders
- FREE shipping on orders over $120***
- FREE express shipping over $250***
- Active on social media - Tag us or DM us!
- Large Facebook Community for like-minded individuals.
- Piper - Come in-store and meet our friendly, cute, house dog. Careful, she loves to lick!
- GST Registered. If you are a business and want to claim GST you may note other niche FPV stores are not registered.