Coming Soon

Bondtech DDS Extruder For Creality3D CR10S (New Version) EXT-KIT-66

$439.95 (inc. GST)

In StockIn StockOut of stock

CURRENTLY IN STOCK

Add to Wishlist

Are you looking for a Bondtech DDS Extruder for the CR-10S in Australia? You've come to the right place!

New and Upgraded Version!

All Bondtech DDS Extruders shipped from now on will be the upgraded version which features:

  • Easily swappable thermistor and heater cartridge
  • Reduced main cable side
  • Easier maintenance and repairs

See more about the upgrades here!

DIRECT DRIVE EXTRUDER & HOTEND

Bondtech Direct Drive System for Creality3D CR10S is an upgrade kit to address material extrusion issues. It includes a high-performance Direct Drive BMG extruder and an all-metal E3D V6 HotEnd. Buy this model to address material feeding issues of the original model and to extend the materials you can use to 3D print.

100% TESTED

Because we test ALL units before shipping this upgrade is supplied fully assembled thus ensuring all required parts are supplied.

HIGH RELIABILITY AND PERFORMANCE

This Direct Drive System from Bondtech is a high-performance 1,75mm Direct Drive extruder and all-metal HotEnd for the Creality3D CR10s. Bondtech’s unique Dual-Drive technology in the BMG extruder, combined with a genuine E3D's v6 HotEnd gives you a direct drive extruder with problems free material feeding and enables the use of a wider range of materials. The housing parts are printed with PA12 (polyamide) for maximum strength and precision using industrial grade SLS technology.

MAKE YOUR 3D PRINTER EVEN BETTER

Bondtech's Direct Drive System (DDS) for CR10S is designed to give the user more options - different materials; higher flow and/or wider nozzles; thinner layers - and achieve a higher print quality. The DDS includes an integrated BMG (Bondtech Mini Geared) extruder featuring our unique Dual-Drive technology and an E3D's well known V6 All-Metal HotEnd. The DDS housing design provides an effective Hot-End cooling.  With the 3:1 gearing ratio, high resolution prints with small nozzles or high flow prints with bigger nozzles can be achieved.

PLUG-AND-PLAY SYSTEM

For ease of use the system is ready to plug in once mounted on your printer. No extra cabling work and soldering is necessary.

UPDATED FILAMENT SENSOR HOUSING

The filament sensor holder has been reworked to have a better grip to the printer and is using a steel ball to allow the filament to pass the sensor both when loading or unloading.

THANKS TO THE COMMUNITY

The extruder design is inspired on Greg3D’s “The Tank”.  You can check out more of his work here: https://www.thingiverse.com/Greg191134/about.

BONDTECH DIRECT DRIVE SYSTEM

This all-in-one solution is easy to install and ready to use. Bondtech’s DDS uses our unique Dual-Drive technology with an internal gear ratio of 3:1 and 415 steps per mm. Our DDS also uses an E3D’s V6 HotEnd that allows to easily print a wide range of filaments from the market with less stringing and clogging with processing temperatures up to 285°C.

Study and test was put on the design of the housing as well. Its geometry allows for effective cooling of the HotEnd by perfecting the placement of the Sunon 4010 axial fan and the orientation of the cool air flow. Along the cooling of the HotEnd, we also achieved a more effective part cooling by using a Sunon 5015 Radial Fan and a fan shroud that focus the air flow right to the tip of the nozzle. The filament sensor housing was also redesigned. You can now properly attach it to the CR-10S with a strong grip. The steel ball we placed below the lever on the filament path, lets you feed material in booth directions, during loading and unloading. Much work was put on the power cables management and setup. Everything is ready to plug-in. No need to cut or solder. The old cables and components required to be removed, will remain intact and able to be reused.


MULTI-MATERIAL CAPABILITY

Our Bondtech extruder feeds all material with high reliability, from slippery nylons and soft TPU/TPE filaments to highly rigid and sometimes brittle carbon-filled high-strength materials. The extruder is designed for 1.75 mm filaments but has been tested to ensure performance of filament from 1.5mm up to 2.0mm allowing for high reliability regardless of the tolerance of the filament used. The V6 All-Metal Hot-End from E3D allows users to reliably print high temperature materials (up to 285°C) and it gives extra functionality to work with soft and flexible filaments. This combination opens up a wide range of opportunities for your Creality3D CR10S.


BONDTECH’S DUAL-DRIVE EXTRUDER

Our unique Dual-Drive technology delivers uninterrupted material flow without fear of grinding or slipping in even the most demanding conditions. Bondtech users allover the world will attest that even in prints with thousands of retracts our extruders perform flawlessly, with unmatched precision, and zero damage or degradation to the filament.

Whether you require high resolution prints with small nozzles or high-flow prints with big nozzles the optimized gearing ratio combined with our industry leading drive gears provides unparalleled pushing power and lightning fast retractions.


BL TOUCH READY

Bondtech’s Direct Drive System for CR10S is BL Touch ready. The housing includes the mounting holes to attach this popular bed leveling sensor used by Creality3D in many models. You can 3D print a mount, designed by Greg3D, and screw it in to attach the BL Touch. Visit our BL Touch installation Guide to learn step by step how to do it.

In our Guide we show how to attach the BL Touch to the DDS for CR10S, and provide a link to other Guides on how to finish the cables connection and firmware settings.

Before buying a BL Touch check these installation guides. Keep in mind that different versions of the Creality3D CR10S and BL Touch will require adjustments to the connections and firmware setups.

 

Why buy from Phaser FPV?

  • DEPENDABLE - Phaser started in 2012 -Long reputable history & 5 star reviews.
  • SPEED - All stock located in our retail store in Gosford NSW Australia. - We ship express today, you receive tomorrow.***
  • TRANSPARENT Stock - If it says in stock on our website, we ship today! If we know the ETA, we also advise of this on each product.
  • EXPERIENCE - Within our 10 Staff Members, you will find at least two who know, are experienced, and regularly use our products. Confused or not sure what to buy? Please call us and get our advice - We will save you money, do not buy twice.
  • FREE gift on first and recurring orders
  • FREE shipping on orders over $120***
  • FREE express shipping over $250***
  • Active on social media - Tag us or DM us!
  • Large Facebook Community for like-minded individuals.
  • Piper - Come in-store and meet our friendly, cute, house dog. Careful, she loves to lick!
  • GST Registered. If you are a business and want to claim GST you may note other niche FPV stores are not registered.
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page