Eachine E010 Tiny Whoop BNF Built by Phaser FPV

$179.00

Style
Quantity
Hours, Mins, Seconds Until Next Despatch
Order Before 2PM AEST (Weekdays) For Same Day despatch.

Product Details

Here is my original post on Tiny Whoop Facebook group regarding the first version we sold. https://goo.gl/1RH2rd

We now sell Version 2!

Over time parts have changed and this is now the fastest thing around with our secret sauce. This is also known as the Rambo Whoop from MMW.

Just add Transmitter and batteries.

We now use the following parts to get this BTF kicking butt!

-E010 Frame
-FX805 Camera
-MMW CL-0615-19 Motors
-Cut E010 Props
-Eachine Beecore FC
-PH 2 Connector

We then use our guide to put the latest version of betaflight and make sure they are flying superb! These are currently shipping with Firmware Betaflight 3.1.6

Install our Taranis EEPE "Phaser D8" from here, then read page 2 on our guide here for what channels/switches are setup.

We recommend using MYLIPO batteries as they have alot more punch than the batteries that come with these. The mylipos have around 15% more grunt to them.

Recommended Parts

mylipo HV 205mah 25C 1S - High Voltage Tiny Whoop - PH2
4-way parallel charge cable - PH2

FLYSKY BINDING TIPS


1. Set to AFHDS v1 Mode On transmitter
2. Set Ch5 and CH6 to SWB and SWC
3. Hold Bind and turn on transmitter
4. Short the bind terminals on FC
5. Power FC.
6. Ch5, SWB to position 2 should arm the quad. If it does not, please check your end points in Betaflight to see if they are at 1000-2000. We found we had to change endpoints on our i6 Transmitter to this.

Betaflight 3.1.6 Dump File

Customer Reviews

Based on 1 review Write a review

View More