Are you wanting to buy the Matek F405-SE Flight Controller in Australia?
The Matek F405-SE has been improved of the previous NON SE verison:
- Barometer BMP280 > Barometer DPS310
- 6-30V Input > 6-36V (3-8S Lipo)
- 5 UARTS > 6
- Many more small changes
F405-SE Quick Start Guide
Specifications
- MCU: 168MHz STM32F405RET6
- IMU: MPU6000 (SPI)
- Baro: DPS310 (I2C)
- OSD: AT7456E (SPI)
- Blackbox: MicroSD slot (SPI)
- VCP & 6x Uarts, 1x Softserial_Tx supported
- 9x PWM outputs (7x Dshot compatible with BF/INAV)
- 2x I2C
- 3x ADC (voltage, current, RSSI)
- 4x RX6 pad(one per corner) for BLheli32 ESC telemetry
- 4x individual ESC power/signal pads
- 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- Built in inverter on UART2-RX for SBUS input
- PPM/UART Shared: UART2-RX
- Vbat filtered output power for VTX
- Camera control: Yes
- Smartaudio & Tramp VTX protocol: Yes
- DJI FPV OSD protocol: Yes
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: Yes
PDB Specifications
- Input: 6~36V (2~8S LiPo) w/TVS protection
- PDB: 4x35A (Max.4x46A)
- BEC: 5V 2A cont. (Max.3A)
- LDO 3.3V: Max.200mA
- Current Sensor 184A (Scale 179 in INAV/BF)
- Battery Voltage Sensor: 1K:10K
Firmware
- INAV: MATEKF405SE
- BetaFlight: MATEKF405SE
- ArduPilot: MATEKF405-WING
Physical
- Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
- Dimensions: 36 x 46 mm
- Weight: 10g
Including
- 1x F405-SE
- 6x silicon grommets M4 to M3
- 1x FR4 PCB Plate 36*36*1mm
- 1x Rubycon ZLH 35V/470uF (Low ESR)
- *** known issue/bug: BetaFlight doesn’t support barometer DPS310 working with STM32F405.
- F405-SE has INAV firmware preloaded for QC
- INAV2.5.1 downloaded from configurator doesn’t support new barometer DPS310. download customized firmware from here.
- DPS310 will be supported officially by INAV2.6 and new configurator.
- ArduPilot Firmware “MATEKF405-WING″ prior to June 25 does not support the onboard barometer DPS310. pls download firmware from “latest” folder.
inav_2.5.1_MATEKF405SE_DPS310.hex
If Baro can’t be detected. In INAV CLI mode, type command
- set baro_hardware = DPS310
- save
betaflight_4.2.0_MATEKF405SE.hex
- known issue/bug: DPS310 will not work even if you type the following CLI command.
- set baro_bustype = I2C
- set baro_i2c_device = 1
- set baro_i2c_address = 118
- set baro_hardware = DPS310
- save
BROWSE MORE
- Browse all MATEK
- Browse all FC's
- Browse all DRONE ELECTRONICS
Why buy from Phaser FPV?
- DEPENDABLE - Phaser started in 2012 -Long reputable history & 5 star reviews.
- SPEED - All stock located in our retail store in Gosford NSW Australia. - We ship express today, you receive tomorrow.***
- TRANSPARENT Stock - If it says in stock on our website, we ship today! If we know the ETA, we also advise of this on each product.
- EXPERIENCE - Within our 10 Staff Members, you will find at least two who know, are experienced, and regularly use our products. Confused or not sure what to buy? Please call us and get our advice - We will save you money, do not buy twice.
- FREE gift on first and recurring orders
- FREE shipping on orders over $150***
- FREE express shipping over $250***
- Active on social media - Tag us or DM us!
- Large Facebook Community for like-minded individuals.
- Piper - Come in-store and meet our friendly, cute, house dog. Careful, she loves to lick!
- GST Registered. If you are a business and want to claim GST you may note other niche FPV stores are not registered.
