Phaser FPV Shark 2s Micro Quad


Hours, Mins Until Next Despatch
Order Before 2PM (Weekdays) For Same Day despatch.

Product Details

We took the Eachine Fatbee F90 hardware, ripped it out and converted it into a shark.

The part list includes

Fatbee 2s Brush Motors
Fatbee 2s 400mah Battery
Fatbee F3 Evo Flight Controller
Fatbee Camera
Parrot 66mm Props
Shark Frame

We had to extend the motor wires, remount everything, upgrade Flight Controller to 3.1.6, change all the settings and tune it, and now it runs like a 4s 250 ;)

You can download our Betaflight 3.1.6 Dump all file here

FRSKY Instructions

Bind by shorting the front right two pins. It is easiest to just solder it together.
Put your Taranis in D8 mode and start the binding procedure. Power Quad, the green flashing light should stop blinking.
You can then stop binding on Taranis, unplug quad, remove the solder and power on and it should be bound with a solid green light.

Please check your receiver tab in Betaflight to make sure all endpoints are correct before flying.




View More