Are you looking to buy Zeez Design 20x20 Combo in Australia?
The Zeez Design Racing Combo comes with an advanced F7 Flight Control, and a powerful 45A 4-in-1 ESC. This combo features highly integrated FPV required functions and processing power allowing you to push your FPV quad sky-high, quite literally.
Zeez F7 20x20 FC
- Mounting Holes 20×20
- Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation.
- Up to 8S input (max 36V)
- 5V BEC up to 3A continuous
- STM32F722 MCU (Support Betaflight, INav, Emuflight)
- MPU6000 Gyro/ACC for smooth performance
- 128MB Onboard flash
- OSD chip Onboard
- 6 available UARTS
- VTX switch to control the ON/OFF of the VTX directly from your transmitter (control via Betaflight with USER1 mode)
- LC Filter for 5V VTX and Camera
- USB Type C connector
- Onboard RGB LED distribution for clean wiring
- to the LED on the arm of the quad.
- 8 Onboard RBG LED (compliant with FAI Rules)
- Logic Side and USB current protection
Zeez 45A 4-in-1 20x20 BLheli_32
- Mounting Holes 20×20
- 3S to 6S input
- Constant Current: 45A
- Peak Current: 55A
- STM32L4 MCU (ARM Cortex M4, 80MHz frequency)
- BlHeli32 Firmware (support Dshot150/ Dhsot300 /Dshot600/ProShot 1000) and still compatible with all older analog protocol (OneShot42, OneShot125, Multishot)
- 8 Pin JST connector and 8 Pin solder pads
- Holes for Aluminum Low ESR capacitor (included 35V 470uF Low ESR capacitor and a spare capacitor)
- Onboard analog current sensor (Betaflight Scale: 200)
- ESC telemetry to read RPM and ESC temperature
- Compatible with Bidirectional Dshot out of the box
- (1X) Zeez F7 2020 Flight Controller
- (1X) Zeez ESC 4in1 45A 2020
- (8X) Aluminum Standoff
- (4X) Aluminum Nut
- (1X) ESC to Flight Controller 8 Pin to 8 Pin JST SH 1.00mm connector
- (1X) ESC to Flight Controller 8 Pin to Free wires (with JST SH crimp) JST SH 1.00mm connector
- (1X) ESC to Flight Controller 8 Pin to Servo Connector JST SH 1.00mm connector
- (1X) JST SH 8 Pin Plastic Housing
- (1X) JST SH 10 Pin Plastic Housing
- (2X) 470uF 35V Low ESR Capacitor
- (1X) XT60 with 12AWG Silicon Cable for battery connection
- (2X) 2.00mm Header Pin for VTX connection
- (2X) 2.54mm Header Pin for Receiver connection
- (4X) Spare M3 rubber anti vibration for Flight Controller or ESC
Optional LED Set (Sold separately)
Why buy from Phaser FPV?
- DEPENDABLE - Phaser started in 2012 -Long reputable history & 5 star reviews.
- SPEED - All stock located in our retail store in Gosford NSW Australia. - We ship express today, you receive tomorrow.***
- TRANSPARENT Stock - If it says in stock on our website, we ship today! If we know the ETA, we also advise of this on each product.
- EXPERIENCE - Within our 10 Staff Members, you will find at least two who know, are experienced, and regularly use our products. Confused or not sure what to buy? Please call us and get our advice - We will save you money, do not buy twice.
- FREE gift on first and recurring orders
- FREE shipping on orders over $120***
- FREE express shipping over $250***
- Active on social media - Tag us or DM us!
- Large Facebook Community for like-minded individuals.
- Piper - Come in-store and meet our friendly, cute, house dog. Careful, she loves to lick!
- GST Registered. If you are a business and want to claim GST you may note other niche FPV stores are not registered.