iFlight Chimera7 6S BNF W/ DJI Air Unit (TBS)

$849.95 (inc. GST)

In StockIn StockOut of stock

CURRENTLY IN STOCK

Style: 1300KV Long Range

  • 1300KV Long Range
  • 1800KV Freestyle
Out of stock
Order in Hours, Mins, Seconds (before 1:00pm AEST) for same day despatch.

4 payments of $212.49 AUD More info

Add to Wishlist

Are you looking to buy iFlight Chimera7 6S BNF with DJI Air Unit in Australia?

Introducing what has been requested for too long already! A super efficient iFlight 7inch Long-Range bird that can go where you couldn't go before and can carry bigger batteries to get the flight time to surf the swiss alps if you want! Super stiff frame for minimum resonance and 2806.5 motors for maximum 7inch prop control. Fly big batteries top-mounted, or even bigger batteries bottom-mounted, 6cells recommended or 5cells for slow cruising. But whatever style you fly, a Lipo or Lion pack will just do the job. Recommended 5S 3.000mAh above (slow cruising) or 6S 2.500mAh above. 

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behavior; Setup instructions included). Vertical and horizontal TBS Crossfire antenna mounts included to cover you and your antenna dead ends just in case. GoPro universal TPU bottom stand included; fits your original GoPro bracket and our TPU GoPro protectors (additional).

Features

  • 6mm rigid arm design for more stiffness
  • Top- and bottom battery mount option
  • XING 2806.5 efficient wide stator motors
  • GPS pre-installed for more safety at distance
  • GoPro TPU bottom stand (GoPro protector not included)
  • 360° TPU protection, DJI cam protection and antenna mounts
  • DJI FPV Air Unit, buttery-smooth 720p\120fps FPV feed (TPU soft mounted) 
  • No props in view (DJI Air unit record in 1080p/60fps)
  • Battery voltage LED status light (illuminated IF logo on the bottom)

FRAME

  • Wheelbase: 320mm
  • Main body dimension: 285*199mm
  • Bottom to top distance: 20mm
  • Arm thickness: 6mm
  • Bottom plate thickness: 3mm
  • Top plate thickness: 2mm
  • Upper(middle) plate thickness: 3mm
  • Camera plate thickness: 3mm (included TPU inserts)

SUCCEX-D F7 V2.1 TWING:

  • MCU: 216MHz STM32F722
  • Gyro:2x ICM20689
  • Baro: YES
  • Blackbox:32MB
  • Betaflight OSD: YES
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale:  100
  • Inverter for SBUS input (UART2-RX)
  • Smartaudio & Tramp VTX protocol supported
  • Beeper pad : Yes
  • RSSI input pad: No
  • UARTs:5
  • Motor outputs: 8
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry:RX5
  • Input voltage:recommended 2-6S, MAX 8S
  • Firmware Target:   IFLIGHT_F722_TWING
  • Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
  • Dimensions:   36*36mm
  • Weight: 7.5g
  • USB type-C

SUCCEX 50A ESC:

  • - MCU: STM32F051
  • - Up tp 48kHz PWM frequency
  • - Capacitance: 470uF/50V
  • - Current Sensor: Yes
  • - Input: 2-6S LIPO
  • - Constant: 50A / Burst: 60A
  • - BlHeli32 telemetry: Yes
  • - BEC: No
  • - Supports up to Dshot1200, Proshot, Oneshot, Multishot 
  • - Target: iFlight-BL32-4IN1
  • - Weight: 14.4g
  • - Mounting pattern: 30.5*30.5mm/Φ3mm
  • - Dimensions: 43*39mm (including the power pads)

Pre-Tuned & Pre-Setup

  • Don't worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check iFlight's linked article on "Firmware/Factory Dumps"
  • Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
  • GPS Rescue is OFF by default to prevent from unwanted or unexpected drone behavior.
  • Please check iFlight's linked article on "GPS Rescue Mode // Setup"

Additional Suggested Parts (Not Included)

Browse more

iFlight-logo – MultiGP Drone Racing League | FPV Racing League

Why buy from Phaser FPV?

  • DEPENDABLE - Phaser started in 2012 -Long reputable history & 5 star reviews.
  • SPEED - All stock located in our retail store in Gosford NSW Australia. - We ship express today, you receive tomorrow.***
  • TRANSPARENT Stock - If it says in stock on our website, we ship today! If we know the ETA, we also advise of this on each product.
  • EXPERIENCE - Within our 10 Staff Members, you will find at least two who know, are experienced, and regularly use our products. Confused or not sure what to buy? Please call us and get our advice - We will save you money, do not buy twice.
  • FREE gift on first and recurring orders
  • FREE shipping on orders over $120***
  • FREE express shipping over $250***
  • Active on social media - Tag us or DM us!
  • Large Facebook Community for like-minded individuals.
  • Piper - Come in-store and meet our friendly, cute, house dog. Careful, she loves to lick!
  • GST Registered. If you are a business and want to claim GST you may note other niche FPV stores are not registered.
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

iFlight Chimera7 6S BNF W/ DJI Air Unit (TBS)

1300KV Long Range
1300KV Long Range
$849.95