Are you wanting to buy Sunlu Filadryer S1 Filament Dryer in Australia?
The Sunlu Dryer S1 is perfect for consumers, artists, and designers. It is an integrated solution for drying 3D printing filament and keeping it dry while printing, which can improve print quality and increase the fun of 3D printers.
By reducing moisture in your filament your 3D printing quality will increase dramatically.
In Australia moisture in the room and even when filament comes sealed in a bag sits between 25-50% humidity. With a Heater box at 40-55 degrees, you can reduce this down to 8-15% and see vast improvements in printing quality.
Most 3D printing filament easily absorbs moisture from the air. And when the moisture content in the filament increases, the print quality decreases, and can even cause prints to fail!
Phaser FPV ultimate filament drying guide
Dry your filament with the Sunlu Filament Dryer & use it while printing with a Dryer Mount. When printing is finished, store it in the airlock bags and remove air with NanoVac Pump. Your filament will stay dry and require less drying before you start your next print when the filament is used again. You can even stack all your filament on top of each other once they are in the bags!
In the past three years, SUNLU team has conducted in-depth research efforts to solve this problem. They finally came up with a powerful solution: Fila Dryer S1.
SUNLU Team conducted a print quality comparison, printing the same 3D model with the same filament and printer. The model printed before drying showed poor print quality and rough surface, while the same model printed after drying the filament showed much-improved print quality and a smooth surface.
The appearance of the SUNLU FilaDryer S1 is beautiful from top to bottom. The transparent top lets you see your filament, and prevents dust accumulation.
Hold Two Rolls of 0.5kg Filaments
Two Filament Outlets
Compatibility of SUNLU FilaDryer S1
The best temperature corresponding to filaments of different materials:
Sunlu Filadryer S1 Specifications
- 1. LCD Display: 2-inch - Displays temperature and time.
- Dual temperature probes to measure the temperature of the cabinet and heating plate.
- Wrapped baking, more uniform heating, better baking effect
- Heating temperature adjusted: which is convenient for customers to use at different temperatures (35℃~55℃ range)
- Timing function: set heating timing, set time, enter the standby state, safe and secure
- Power Supply - Australian Plug GW-Power GW48W - 24v 2A 48W
- 1x Sunlu Filadryer
- 1x AU Power Supply
PhaserFPV Recommendations to further improve this Sunlu Dryer
1. Sunlu Dryer Fan Mod (see blog)
We found that it is only drying the bottom of the filament roll well and not the top as good. By adding a fan, you and circulate the heat and drop the humidity even more, keep the box hotter, and it does the whole roll, not just the bottom.
2. Install a Sunlu Dryer Spool Guide. (You must print yourself, not included and not required, just something we found can help).
3. Use a Dryer Mount for your printer
After 15 revisions and 3 weeks of testing, we are happy to release a custom mount for Prusa and Crealitely/tevos.
- Browse all Filament Dryers
- Browse all Sunlu
- Browse airlock Filament Vacuum Sealing System
- Browse PLA Filaments (also PLA+)
- Browse ASA Filament
- Browse ABS Filament
- Browse PETG Filament
- Browse Nylon Filament
- Browse PC Filament
- Browse SLA Resin
- Browse Speciality Filament
- Browse TPU Filament
Why Choose Phaser FPV?
Here’s Why 1000s of Buyers Trust Us
In the sky-high world of FPV drones and related products, Phaser FPV takes you higher and further – while ensuring a smooth ride every step of the way. As a human brand that puts its clients first, here are a few of the ways we keep giving our customers reasons to come back.
If you place your order with us before 1pm weekdays, we’ll ship it out on the same day you shopped. When we make a promise, we keep it. You’ll be hard-pressed to find any Phaser order that didn’t fly out of our facility on the day it was ordered.
We keep our website updated like hawks. If you see it and it says it’s in stock, you can order it today and get it tomorrow via express shipping.
We’ve spent almost a decade racking in countless 5-star reviews. Give them a read and you'll see everything we have said here is true!
Walk In Anytime
Can’t wait? Then don’t. We’re one of the only FPV drone + accessory stores to have a physical brick-and-mortar establishment in Gosford NSW Australia. You’ll get to meet one of our friendliest – and fluffiest – employees, the Phaser FPV house dog, Piper!
Our handpicked team of technology experts specialize in – and are boffins on – every product we sell. This means they can answer any and all of your technical questions with confidence. Go ahead, put us to the test.
We welcome our customers to reach out to us via email, phone, or LIVE chat. Phaser FPV is the only FPV business to have a dedicated phone line.
It’s clear to see why most of our business comes through word-of-mouth referrals. When you need the best in FPV, 3D Printing and PEV Vehicles, don’t settle for less. Demand the best – insist on Phaser FPV.